Ultra-low FloorBed brings multiple benefits

Beds/FloorBed

Challenges:

John is a 65 years old gentleman who lives in supported accommodation with 24-hour care. John has mild learning and behavioural difficulties, he has poor risk awareness and impulsive behaviour at times. As a result of polio, John has always been dependent on calipers to support his lower limbs when mobilizing, however when indoors he tends to crawl and pull himself up using his upper limb strength to transfer on and off furniture independently.

John experienced a stroke which resulted in weakness in his upper limbs and has had a significant impact on his functional levels, leaving him unable to transfer on and off his furniture without assistance. The impact on his upper limb function resulted in John becoming dependent on the caregivers to assist him with all transfers. Due to John’s learning difficulties and impulsive behaviour, he would often transfer off the bed independently and require significant assistance from the caregivers to assist him off the floor. This placed strain on the caregivers and they were considering the provision of a hoist to manage this, however, they were concerned about how John would react to this.

Results:

A FloorBed was put into place for a trial and set at the lowest point of 2.8″ from the ground. The floor level height of the bed meant that John did not require as much upper limb strength to pull himself up onto the bed. As a result, John was once again able to transfer into bed safely and independently as and when he wished, giving him back his dignity and independence.

The caregivers reported that the FloorBed has a very positive impact on their role as well; not only did the bed significantly reduce the physical strain, it also reduced the amount of supervision and assistance John required to ensure he remained safe. The provision of the FloorBed provided additional benefits for John – it eliminated the need for further manual handling equipment such as a hoist; the risk of an injury when transferring out of bed was significantly reduced due to the floor level height which minimized the impact when transferring; once on the bed, the bed could be raised to allow for a sliding transfer onto the wheelchair and mobile shower chair/commode, and the bed could be raised to an appropriate height to allow for care to be carried out safely.

About Accora

Based on a deep understanding of the needs of individuals, caregivers and service managers – we have developed a range of cost effective chair and bed solutions. Our aim is to help improve comfort, function and posture, and assist in preventing injury from pressure damage or falls.